MIG Welder 155A Gas/no gas Stick Lift TIG Spool Gun Aluminum Welding Machine US
4IN1 MIG Welder 155 Gas/Gasless 220V ARC Lift TIG Spool Gun Aluminum Machine. Mig155 machine Includes: 1x mig welder RBM-1550D(110/220V) 1x 6.6ft earth clamp 1x 6.6ft electrode holder 1x 9.8ft mb15 welding torch 1x 2lb solid wire 1x 8.2ft Co2 & Argon Hose NOTE:DOES NOT INCLUDE TIG TORCH GUN and SPOOL GUN! MIG Welder 155A Gas/no gas Stick Lift TIG Spool Gun Aluminum Welding Machine US. MIG Welder 155 220V Gas/Gasless.
2022 New Upgraded FM155E-100V/200V Composite Multi-Welder. It can be used for a variety of applications such as semi-automatic welding (non-gas, gas and MIX gas combination)/handstick welding/TIG welding spool gun. MIG Function: Combination of non-gas/gas/MIX gas; TIG Function: Increases output current to upgrade the enhanced TIG welding control software. Weldable plate thickness is thicker than before and the arc starts more stable.
When arc begins, large welding current will flow instantly and the arc starts smoothly. Equipped with inverter control and hot start features, the welding rod will not stick to when welding starts, and the welding rod is good to integrate. The machine uses a full digital panel display to achieve concentrated adjustment of wire transfer speed and welding voltage.
Welding parameters are easy to adjust. Thanks to digital control, the machine comes with synergy effect software that matches the wire diameter, material and current.
It is an excellent choice for new welders and is easier for welding professionals. Additional voltage and inductance settings for professionals to find the exact welding performance of various projects. Current display: shows preset current and actual welding current.
MIG Welding Torch Switch (Only effective for MIG 0.8 / MAG 0.8 / FLUX 1.0): The welder can only be operated by the spool gun torch in spool gun torch mode. MIG torch is only used for welding in MIG torch mode.Please check the status of the switch when using it. This light will light up in stick mode. This light will light up in LIFTTIG mode. Voltage Minor Adjustment FunctionIf the output current does not change, the output voltage can be adjusted from -3V to +3V. Different individual habits and work can improve the welding effect.
Current adjustment functionOnly the current is adjusted, but this unit is a digital device. Parameters of current, voltage, and wire supply speed are matched.
After adjusting the current, other parameters follow the conversion and matching. OC Lights: If the welding load is overload and the output current of the machine is too big, the internal temperature of the machine is too high and the mechanical failure lamp will light up. Machine can be recovered after heat dissipation is normal. Please restart the power supply.AC 110V: When the input voltage is 110V. AC 220V: This light will light up when the input voltage is 220V. MIG Welding Mode Shift Button: MIG 0.8, MAG 0.8, FLUX1.0. Holding and placement of torch.
Hold the torch so that the wire is approximately 1/4 (6.4mm) above the workpiece. The angle of the torch crosses with the workpiece is known as the working angle. In general, the torch needs to be divided into two workpieces of the angle. The angle of the torch to its movement is known as the torch angle. The torch can be pulled or pressed according to many factors including personal preferences.
Torch can be moved either straight (stringer beads) or small overlapping arc (weaving pattern). Stringer is suitable for very thin materials that cannot steal too much heat. For thicker materials that require more heat, weaving is recommended. Advanced German cooling system, integrated overheating protection, and high performance cooling, you can expect better performance. We are a traditional company that integrates production, research, development and sales and has been deeply involved in welding for nearly a decade.
Domestic and international foundation and professional certification. The current output is more stable and will last longer.
Upgraded version of igbt inverter. The welder uses IGBT technology at the tip to achieve 85% efficiency and 0.7 power ratio. Miniature welding equipment reduces the loss of copper and iron, is very energy saving, energy efficiency is noticeable, and the welding efficiency is greatly improved. Full Copper Welded Torch Interface.
Supports use of spool gun. The spool gun can weld aluminum. In order to meet the needs of more demands, we have added a spool gun interface. Customer feedback, our machine has excellent aluminum welding performance Spool Gun not included. Waterproof switch can protect your safety better.In cold weather, heating the gas regulator to maintain good working performance. Item Processing Time: The processing time for a specific order depends on the product type and stock status.
Processing time will be postponed during holidays or weekends! So please test whether the product works well as soon as you receive it! 7 days no reason to return. Return must include all original package and accesorries, item must in good condition. Defective item: Please contact our customer service to explain the product problem before returning the goods.We will provide 24-hour online service and lift-time technology support for every valued customer! First-class talents and advanced equipment. Mart Design with full digital control, Constant voltage and synergic adjustment control.
Ully implement the ISO9001:2008 quality management system. Each Machine with 100% QC Test, Life Test and Welding Function Test, Drop test and Dust test!Over 10 years factory control system focus on the welding field. Please be patient when contacting us, all messages will be replied within 24 hours. Please let us know immediately if a package is damaged upon arrival. Gasless, Line Voltage Compensation, Thermal Overload Protection, With Gas.
Suit For US, CA and Other Countries.