GAS (CO2) can use 0.8/ 1.0mm wire. When using 0.8mm wire, it can weld 0.9 4.8mm thickness, when using 1.0mm wire, it can weld 1.2 6.4mm thickness 4. TIG FUNCTION - Can use 1.6mm and 2.4mm tungsten. When using 1.6mm tungsten can weld 0.7 4.8 thickness, using 2.4mm tungsten can weld 1.2 6.4mm thickness 5.
MMA FUNCTION - Current 10 170 amp. Can weld 2.5/ 3.2/4.0mm electrode. Using 2.5/ 3.2mm rods, can weld 1.6 3.4mm thickness.
Using 4.0mm rods, can weld 3.4mm 8.0mm. Rated input voltage (V) - 110V/220V Frequency (HZ) - 50/60 Rated input power (KW) - MIG: 5.7; TOG: 4.37; MMA: 6.3 Rated input current (A) - MIG: 36.0; TIG: 28.1; MMA: 40.5 Rated input apparent power (KVA) - MIG: 7.8; TIG: 6.21; MMA: 8.9 Welding current adjust range (A) - 10 200 Welding voltage adjust range (V) - 10 26 Duty cycle (40? 10min) - 25%, 200A; 60%, 150A; 100% 130A No load voltage (V) - 50V (adjustable) Power factor - MIG: 0.73; TIG: 0.70; MMA: 0.71 Efficiency(%) -? 80% Protection class - IP23. 1 x mig torch 1 X electrode holder 1 X earth clamp 1 X gas tube 1 X Tungsten 1 X graphite wire feed tube: when welding aluminum, please do use it with the mig gun 2 X hose clamps: To hook up your gas to the welder. The gas gives you a much nicer weld then using plain flux core gasless wire 1 X welding brush/ hammer combo: Help to keep your surface clean as you are welding. Deposits build up and you can use this to knock them off.1 X WP-26V TIG GUN. If any other issues arise, please do not hesitate to message, we would be more than happy to assist you. Item Processing Time: The processing time for a specific order varies with the product type and stock status. All our item offer 7 days return peroid, defective or non-defective. Return must include all original package and accesorries, item must in good condition.
If you have any issue, you can just give us a message, and we give you full resolve. Please be patient when contacting us, all messages will be replied within 24 hours. Please let us know immediately if a package is damaged upon arrival.