Welding Gun Welder

Aluminum 5 IN 1 200A MIG ARC TIG Welder Gas Gasless Welding Machine Spool Gun

Aluminum 5 IN 1 200A MIG ARC TIG Welder Gas Gasless Welding Machine Spool Gun
Aluminum 5 IN 1 200A MIG ARC TIG Welder Gas Gasless Welding Machine Spool Gun
Aluminum 5 IN 1 200A MIG ARC TIG Welder Gas Gasless Welding Machine Spool Gun
Aluminum 5 IN 1 200A MIG ARC TIG Welder Gas Gasless Welding Machine Spool Gun
Aluminum 5 IN 1 200A MIG ARC TIG Welder Gas Gasless Welding Machine Spool Gun
Aluminum 5 IN 1 200A MIG ARC TIG Welder Gas Gasless Welding Machine Spool Gun
Aluminum 5 IN 1 200A MIG ARC TIG Welder Gas Gasless Welding Machine Spool Gun
Aluminum 5 IN 1 200A MIG ARC TIG Welder Gas Gasless Welding Machine Spool Gun
Aluminum 5 IN 1 200A MIG ARC TIG Welder Gas Gasless Welding Machine Spool Gun
Aluminum 5 IN 1 200A MIG ARC TIG Welder Gas Gasless Welding Machine Spool Gun

Aluminum 5 IN 1 200A MIG ARC TIG Welder Gas Gasless Welding Machine Spool Gun

Aluminum 5 IN 1 200A MIG ARC TIG Welder Gas Gasless Welding Machine Spool Gun. HZXVOGEN 110V/220V MIG Welder ARC TIG MIG Aluminum Welding Machine 200A With Spool Gun. THE MOST ADVANCED MULTIFUNCTIONAL WELDER - HZXVOGEN HBM2280 MIG welder with wider LCD displayed, it is a smart control. It is super easy and convenient to chose the welding mode, material, welding wires, tungsten rods, electorde and the workpiece thicness you need by spinning and pressing the buttons.

It will show all the parameters clearly 2. CAN WELD ALUMINUM - This welder can weld aluminum, iron, carbon steel, stainless steel, etc. This mig welder came with qualify accessories: MB24 mig gun, 1.5m earth clamp, 1.8m electrode holder, 1.0mm 1kg flux cored wire and US plug. This welder features a easy carrying handle, compact design, easy for translation and storage 3. MIX GAS can use 0.6/ 0.8/ 0.9/ 1.0mm flux wire.

When using 0.6/ 0.8/ 0.9mm wire, it can weld 0.7 3.4mm thickness. When using 1.0mm wire, it can weld 1.2 6.4mm thickness.

GAS (CO2) can use 0.8/ 1.0mm wire. When using 0.8mm wire, it can weld 0.9 4.8mm thickness, when using 1.0mm wire, it can weld 1.2 6.4mm thickness 4. TIG FUNCTION - Can use 1.6mm and 2.4mm tungsten. When using 1.6mm tungsten can weld 0.7 4.8 thickness, using 2.4mm tungsten can weld 1.2 6.4mm thickness 5. MMA FUNCTION - Current 10 170 amp.

Can weld 2.5/ 3.2/4.0mm electrode. Using 2.5/ 3.2mm rods, can weld 1.6 3.4mm thickness. Using 4.0mm rods, can weld 3.4mm 8.0mm. Rated input voltage (V) - 110V/220V Frequency (HZ) - 50/60 Rated input power (KW) - MIG: 5.7; TOG: 4.37; MMA: 6.3 Rated input current (A) - MIG: 36.0; TIG: 28.1; MMA: 40.5 Rated input apparent power (KVA) - MIG: 7.8; TIG: 6.21; MMA: 8.9 Welding current adjust range (A) - 10 200 Welding voltage adjust range (V) - 10 26 Duty cycle 40? 10min - 25%, 200A; 60%, 150A; 100% 130A No load voltage (V) - 50V (adjustable) Power factor - MIG: 0.73; TIG: 0.70; MMA: 0.71 Efficiency(%) - =80% Protection class - IP23.

Wire Diameter :Mild Steel 0.4-0.8mm. Stainless Steel :0.6-0.8mm.

Changeable Gun Neck : Straight neck/Goose neck. Rated electrical controlling rate: 24V. Cable length: 3 Meters / 10ft. Switch off welder power, make the Euro-central.

Connector connect with wire feeder adaptor, and. Press the button on the spool cover then open it.

Loose the spool cover fixing screw (levo), slide wire. Spool to it's shaft, Adjust nut to make it suitable. Push wire through guides into wire feeding roll. Press the trigger after closed the cover, wire feeding.

Roll make the wire into the gun tube. Adjusting the wire feeding pressure. Turn the pressure adjusting screw clockwise with. Hand, the pressure will increase, otherwise it will. Adjusting the wire feeding speed. Turn the wire feeding speed adjusting knob clockwise, the speed will increase, otherwise it will. 1 x mig welder 1 X electrode holder 1 X earth clamp 1 X gas tube 1 X Tungsten 1 X graphite wire feed tube: when welding aluminum, please do use it with the mig gun 2 X hose clamps: To hook up your gas to the welder. The gas gives you a much nicer weld then using plain flux core gasless wire 1 X welding brush/ hammer combo: Help to keep your surface clean as you are welding. Deposits build up and you can use this to knock them off.

If any other issues arise, please do not hesitate to message, we would be more than happy to assist you. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\MIG Welders". The seller is "motorcar-5" and is located in this country: US. This item can be shipped to United States.

  • Bundle Listing: No
  • Model: HBM2280
  • Multi-process: YES
  • Brand: HZXVOGEN
  • Rated input voltage: 110V/220V
  • Rated input current (A): MIG: 36.0; TIG: 28.1; MMA: 40.5
  • Output no-load voltage (V): 50V (adjustable)
  • Efficiency: ≥80%
  • Welded Material: Aluminum,Iron, stainless steel
  • Voltage: 110V,220V
  • Feed: Automatic Feed
  • Item Type: MIG Flux Cored TIG Arc Stick Combo
  • Welding Process: MIG Lift TIG STICK ARC
  • Type: MIG aluminum Welder
  • Warranty: 2 Years warranty
  • Features: Gasless, With Gas
  • With: MIG Spool Gun
  • Power Source: Corded Electric


Aluminum 5 IN 1 200A MIG ARC TIG Welder Gas Gasless Welding Machine Spool Gun