This is a brand new 15 ft, HTP replacement welding gun. The front end parts of this gun are completely interchangeable with the OEM gun - that's right, it uses the same gas nozzle, the same tip adapter, the same nozzle adapter, and the same contact tips as the OEM gun.
But we believe this HTP replacement gun is better than the OEM gun! You can see the heavy duty spring in both the handle and where the gun plugs into the machine, which offers a much better support system than the OEM gun. Also, our handle has a good clean ergonomic design, so it fits in your hand better than the OEM gun.
Plus it is color coded to match your machine. You can also see the high quality of our cable assemblies. We insulate the crimp connection with shrink tubing to prevent any damage to the trigger wires. In the picture where we.The shrink tubing, you can see the solid copper crimp on the brass connection, and the last picture shows a cut-a-way of the cable assembly. You see the liner going into Inner Tube.
The wire runs down through the liner. Between the liner and the inner tube is where the gas flows, and you can see how the copper wires which carry the welding current and the trigger wires are.Wound around the inner tube. Then the entire cable is insulated with a rubber outer cover. We build our Miller replacement guns with the same quality we build into the HTP welding guns we use on every HTP MIG welder! It fits all of the following models. Hobart Ironman 230, 240, 250, and 275 Mig Welders.
This 15 ft long gun will handle. It will feed all types of wire, steel wire using gas, flux cored wire requiring no gas, and stainless steel wire. It comes standard with a. 035 diameter tip in the welding gun. Go to our store and see all the items we have for sale.
Please send us a message if you have any questions on our items.