The ZVS soft switch technology reduces the IGBT switching loss. The efficiency of the machine has a lot of improvement, in the state of MMA, it can reach nearly 80%.Can make the aluminum profile thin plate not deformed, the thick plate has a high degree of fusion, and the weld seam is beautifully formed and the welding point is not black after the porosity welding. Large-screen LCD display, intuitive and detailed understanding of welding parameters, making work easier, MCU control system, responds immediately to any changes. It can be matched with spool welding gun, fast drawing welding, and improving welding efficiency. The Welder uses the average current control mode, and have general protection functions, for example the limited overshoot, the limit of the pulse width, overvoltage, over-current, over-heating and so on.
Those functions obviously improve the stability and security of the welding machine. It will automatically enter the standby state if no load time exceeds three minutes, reducing power consumption. MIX GAS can use 0.6/ 0.8/ 0.9/ 1.0mm flux wire. When using 0.6/ 0.8/ 0.9mm wire, it can weld 0.7 3.4mm thickness. When using 1.0mm wire, it can weld 1.2 6.4mm thickness.GAS (CO2) can use 0.8/ 1.0mm wire. When using 0.8mm wire, it can weld 0.9 4.8mm thickness, when using 1.0mm wire, it can weld 1.2 6.4mm thickness. Can use 1.6mm and 2.4mm tungsten. When using 1.6mm tungsten can weld 0.7 4.8 thickness, using 2.4mm tungsten can weld 1.2 6.4mm thickness. Can weld 2.5/ 3.2/4.0mm electrode. Using 2.5/ 3.2mm rods, can weld 1.6 3.4mm thickness. Using 4.0mm rods, can weld 3.4mm 8.0mm. Model:SYN-MIG200 PRO Rated input voltage (V) - 110V/220V Frequency (HZ) - 50/60 Rated input power (KW) - MIG: 5.7; TOG: 4.37; MMA: 6.3 Rated input current (A) - MIG: 36.0; TIG: 28.1; MMA: 40.5 Rated input apparent power (KVA) - MIG: 7.8; TIG: 6.21; MMA: 8.9 Welding current adjust range (A) - 10 200 Welding voltage adjust range (V) - 10 26 Duty cycle (40 10min) - 25%, 200A; 60%, 150A; 100% 130A No load voltage (V) - 50V (adjustable) Power factor - MIG: 0.73; TIG: 0.70; MMA: 0.71 Efficiency(%) - =80% Protection class - IP23 Insulation class - F Cooling:AF Wire diameter(m)Fe:0.6/0.8/1.0; Ss:0.8/1.0; AI:0.9/1.0;Flux:0.9/1.0/1.2 Electrode Type:6013;7018;7014 etc.
1 X 4m Mig Torch. 1 X 3m Spool Gun 1 X Electrode Holder 1 X Earth Clamp 1 X Gas Tube 1 X Tungsten. 1 X 110v to 220v Convert Plug. 1 X Graphite Wire Feed Tube 2 X Hose Clamps 1 X Welding Brush/ Hammer Combo. Item Processing Time: The processing time for a specific order varies with the product type and stock status.
If you have any issue, you can just give us a message, and we give you full resolve. Please be patient when contacting us, all messages will be replied within 24 hours.Please let us know immediately if a package is damaged upon arrival. The item "110V 220V 200Amp MIG Welder Weld Aluminum With Spool Gun MIG TIG ARC MMA Welding" is in sale since Thursday, October 28, 2021.
This item is in the category "Home & Garden\Tools & Workshop Equipment\Power Tools\Welding & Soldering Tools". The seller is "hitboxweld" and is located in Bell, California.
This item can be shipped to United States.